3 wire 9 LED Contents Gauge

3 wire 9 LED Contents Gauge
  • Click to enlarge

Product Information

This 3 wire LED contents gauge does not have a 4th output wire to switch On and Off a GAS IT tank or GAS IT Plus bottle with our Electronic Remote outlet solenoid fitted. If you have a Electronic Remote outlet solenoid fitted then click here to visit our GAS IT Electronics & Controllers - Low Voltage Category where we list many options to control your electric outlet gas tank or GAS IT Plus bottle.


If you want the convenience of being able to see the gas level of our supplied GAS IT Horizontal or upright 4 hole gas tank inside your vehicle, or a 3 hole Alugas tanks then you need to buy this easy to fit 12 volt, 3 wire GAS IT 9 LED contents gauge ( No switched output wire ) is a great item to add to any GAS IT 4 hole products. If your gas tank doesn't already have the GAS IT remote tank sender fitted, you need to buy that part separately or we do a gauge and sender Kit on this webshop - http://www.gasit.co.uk/index.php?_a=product&product_id=325

The internally mounted LED gauge only needs a small 20mm hole drilling and as it is surface mounted with its own sticky pad. 2 small wires need to be ran to the gas tank and 2 wires to a 12 volt live and earth source to make this work.

It's easily Retrofitable and doesn't need any of the valves in the tank removing and only needs a separately sold on tank sender to make this in vehicle LED contents display gas level contents. You only need to provide 2 core wire to go from the tank to gauge you mount in the vehicle to make this item work.

The separately supplied GAS IT tank sender picks up the level from the already fitted float magnet in the 4 hole refillable gas tank which the sender picks up and relays it to the GAS IT led gauge inside the vehicle.

This is the identical item that we supply directly to many Major Motorhome Manufacturers here in the UK that we also supply.

These items will only work with our 4 Hole refillable GAS IT tanks and 4 hole GAS IT Plus bottles, other Stako 4 hole tanks or 3 Hole Alugas tanks. Please note - this GAS IT sender unit and GAS IT LED is not a calibrated unit and as such the tanks contents displayed can vary.


It will not work with a 2 hole GAS IT, Gaslow bottles, 2 hole Alugas or any standard take back for exchange type gas bottles.

Product CodeGI-ACCS-023
ManufacturerGAS IT

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.