MANUAL- 200 x 25 ltr GAS IT Horizontal Vapour tank. - (GI-VT-002-S-C)

MANUAL- 200 x 25 ltr GAS IT Horizontal Vapour tank.
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge

£234.74


Product CodeGI-VT-002-S-C
ManufacturerGAS IT
ConditionNew
Weight19Kg

200 diameter x 25 ltr GAS IT Vapour tank

25 ltr GAS IT Vapour tank.This Tanks come fully valved with the protective aluminium air box and is 200mm x 884mm in size ( not including the air box )

These refillable Tanks are the quality 4 hole type as fitted by many OEMS around the UK and Europe. 

They are 25 ltr water capacity which means they hold 20% less than their listed amount due to automatic 80% float driven shut of filling valve in the tank when filled by Gas, meaning you will never over fill the tank even when only part of the gas has been used - They will always fill up to 80%

Our GAS IT Manual Tap Option Tanks, like this one, does not need any electrics to operate it as its manual and closes by hand as you would a gas bottle, but unlike a traditional gas bottle, our Manual Tap's  as fitted to all GAS IT Manual tanks ever sold comes with a built in Automatic Excess Flow Valve (EFV ) which shuts off the gas in a controlled manor should there be an uncontrolled release of gas from the outlet tap.  That's why GAS IT tanks with Manual Outlet Tap are still the best selling refillable gas tanks fitted as its simple, uses no electric and has this EFV built in safety feature.  It is fitted with a 21.8LH outlet thread on the manual tap so you need to fit a stainless steel pigtail of 21.8LH to W20 type to remotely mount your regualtor above the liquid level in the tank.

This listing is the 25 ltr tank and pre-installed valves & airbox only. You will need to buy other parts which are all available on our webshop to complete the install e.g. fill point, brackets, hoses, electronics and so on.

All GAS IT horizontal vapour tanks ( EASYFIT or Standard) are certified to the UK & EU R67 regulation.

Please note the 200 diameter size is the size of the tank only and does not include the extra size of the valve box as seen in the picture.

This tank is available with feet listed on our webshop - http://www.gasit.co.uk/index.php?_a=product&product_id=505

In line with the N.C.C. CoP 306 and also the gas tank manufactures requirements, you must protect your GAS IT tank when mounting underneath the vehicle from mechanical damage caused by stones and road debris. A good quality rubberised underbody spray to help protect and prolong your gas tanks life, and the associated mounting system, from Stone chips and future rust must be applied on install.

We sell an underbody spray on our webshop for this application via the install tool and accessories category.  Please make sure the rubberised coating on the tank is checked at least once a year and recoated in any areas that have been washed away by general road wear.

Failure to protect the tank against stone chips and mechanical damage on install will invalidate any warranty on the tank and mounting system.



Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.

This field is required.
Top

eCommerce by CubeCart