Mercedes Sprinter 2006 - 2017 230 x 30Ltr GAS IT System - (GI-0116)

Mercedes Sprinter 2006 - 2017 230 x 30Ltr GAS IT System
  • Click to enlarge
  • Click to enlarge


Product CodeGI-0116
ManufacturerGAS IT
This GAS IT product is available to pre-order now and is expected to be instock with us on 25 Jan 2019

On this purchase you earn GAS IT Reward Points: 379

Which are worth : £9.48 off your next webshop order

If your wanting to fit a GAS IT EASYFIT gas tank as a retrofit item to a Mercedes Sprinter 2006 - 2017, then this is one of the options avaible to you.

Our in house developed OEM specification GAS IT EASYFIT tank system has been designed to locate the 30 ltr GAS IT tank under the rear drivers side ( RH drive vehicles ) via the 4 GAS IT specific vehicle type brackets and require no welding or cutting. They fit under the driver's side on right hand drive vehicles and fix with each to the cross members. Always have a look to make sure there are no other factory options like AdBlue tanks, side steps and so forth that are fitted in the same location and that edge from edge measurements are 550mm Cross members - see picture. 

Our GAS IT Chassis brackets for retrofit installations don't require insulated floors to be cut or modified as they bolt directly through the outriger cross member's which then allow our quick install feeted GAS IT tank to be fixed to the vehicle. Our EASYFIT gas tank's allow 1 man installation and quick and easy removal should you need to in the future for jobs like repainting the van which would go into an oven.   All fixing's to bolt the tank mounting frame to the vehicle and the GAS IT tank to the mounting system are provided. We also sell installtion tools like drill bits, stone guard, gloves and safety glasses to name just 4 to aid you on our webshop )

On completion, your installation will not only comply with the relevant road vehicle gas regulations for the UK and Europe, but it will exceed their technical requirements and make your GAS IT tank safe and legal for use on the roads.

If you want a different GAS IT tank size from this 30 ltr EASYFIT gas tank, then we also offer the option of using a 20, 25, or even 38 ltr GAS IT EASYFIT gas tank.  

Options available to select on our website include various fill point options and colours, underbody tank spray, stainless pigtail lenghts and regulator options.

As all GAS IT tanks are fitted with automatic excess flow valves in the inlet and outlets of the tank, It complies with the EN1949 regulations which states you do not need to fit a crash sensing regulator to run your gas whilst moving ( assuming your gas appliance system its approved to be used whilst vehicle is in motion.)

The GAS IT gas tank kit is a full 30 ltr gas tank kit with a undersill fillpoint system ( drivers side) which does not require the body to be drilled to fit a fillpoint mounting box  :- 
1x 30Ltr GAS IT fully valved tank with black powder coated airbox & factory fixed mounted feet.
1x Set of Heavy duty vehicle specific chassis mounting brackets.
1x Chassis bracket fitting kit - M10 ISO bolts, washers, nuts.
1x 1.5 mtr OEM R67 approved high pressure filler hose.
1x Fill point mounting bracket
1x Brass fill point with 90° outlet
1x Fill point dust cover 
1x Leak Test Spray 10ml 
1x LPG Saftey Sticker for LPG Tank
Before buying this system, we always recommend you make sure the location where the GAS IT EASYFIT gas tank is designed to fit is not already used by the vehicle manufactuers for AdBlue tanks, water or waste tanks, steps and so forth, and that the gap between each cross member as per the bracket measurments in this kit.

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.

This field is required.

eCommerce by CubeCart