Peugeot 30Ltr Euro 4 GAS IT System - (GI-0064)

Peugeot 30Ltr Euro 4 GAS IT System
  • Click to enlarge
  • Click to enlarge

£375.62



Product CodeGI-0064
ManufacturerGAS IT
ConditionNew
Weight30Kg

On this purchase you earn GAS IT Reward Points: 375

Which are worth : £9.38 off your next webshop order

If your wanting to fit a gas tank as a retrofit item to an already converted motorhome, then this is the gas tank mounting system for you.

Our in house developed OEM EURO 4 specification GAS IT tank system has been designed to locate the 30 ltr GAS IT tank in the centre of the vehicle - between the exhaust & hand brake cable pivot, with the gas tank running left to right, which is where 99% of the UK Motorhome manufacturers who fit the GAS IT tanks fix theirs.

Our GAS IT Chassis brackets for retrofit installations, don't require insulated floors to be cut or modified as they bolt directly through the cross members which then allow our quick install feeted GAS IT tank to be fixed to the vehicle. Our feeted gas tank allow 1 man installation, and quick and easy removal should you need to in the future.   All fixings to bolt the tank mounting frame to the vehicle, and the GAS IT tank to the mounting system are also provided. 

On completion, your installation will not only comply with the relevant road vehicle gas tank mounting regulations for the UK and Europe, EN1949, R67, NCC C.o.P. 306 but it will exceed their technical requirements.

If you want to go slightly less capacity we also do a 20 ltr and 25 ltr GAS IT system, which have their own seperate listing on our GAS IT Webshop,

Options available to select in this tank listing include the smaller 20 ltr gas tank, various fill point options and colours, underbody tank stone chip protection spray, remote LED contents gauge system, stainless pigtail and regulator options.  

As all GAS IT tanks are fitted with automatic excess flow valves in the inlet and outlets of the tank, It complies with the EN1949 regulations which states you do not need to fit a crash sensing regulator to run your gas whilst moving ( assuming your gas appliance system its approved to be used whilst vehicle is in motion.)

The GAS IT OEM EURO 4 specification gas tank kit comes complete with:-

 
1x 30Ltr GAS IT fully valved tank with black powder coated airbox & factory fixed mounted feet. ( Size - 200mm Diameter x 1052mm Length - Black Airbox size not included )
1x Set of Heavy duty vehicle specific chassis mounting brackets.
1x Chassis bracket fitting kit - M10 ISO bolts, washers, nuts.
1x 1.5 mtr OEM R67 approved high pressure filler hose.
1x Body mount fill point system -  Black Fill box & fill point.
1x Fill box OEM protector ring.
1 x LPG Safety Sticker for LPG tanks.
1 x Leak spray fluid - to test your joints after install.
 
Before buying this system, we always recommend you make sure the location where the tank is designed to fit is not already used by the vehicle manufactures for water tanks, steps and so forth, and that the gap between each cross member as per the bracket measurements in this kit.


Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.

This field is required.
Top

eCommerce by CubeCart