VW Crafter 230 x 30Ltr GAS IT System 2006 - 2017

VW Crafter 230 x 30Ltr GAS IT System 2006 - 2017
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge

Product Information
Currently out of stock but available on preorder purchase. This GAS IT item is expected back in stock on 27 Oct 2020

Buy this tank with self fit valve option and enjoy a significant price reduction.

This tank is available to buy either totally pre-valved by us or you have the option to purchase it with all the valves supplied separately for you to self fit with a significant price reduction. ( Valve fitting instructions available here on line at the GAS IT knowledgbase -https://www.gasit.co.uk/support/knowledgebase.php?category=35 )

Please make sure this tank 100% fits the location and vehicle you have before purchase as special order items are exempt from normal returns under UK government guidelines.

If your not sure it 100% fits or your unable to fit the valves in the tank ( if you choose the self fit option ) we ask that please do not purchase this item & contact a GAS IT Dealer.

If your wanting to fit a GAS IT EASYFIT gas tank as a retrofit item to a VW Crafter, then this is one of the options avaible to you.

Our in house developed OEM specification GAS IT EASYFIT tank system has been designed to locate the 230 x 30 ltr GAS IT tank under the rear drivers side ( RH drive vehicles ) via the 4 GAS IT specific vehicle type brackets and require no welding or cutting. They fit under the driver's side on right hand drive vehicles and fix with each to the cross members. Always have a look to make sure there are no other factory options like AdBlue tanks, side steps and so forth that are fitted in the same location and that edge from edge measurements are 550mm Cross members - see picture. 

Our GAS IT Chassis brackets for retrofit installations don't require insulated floors to be cut or modified as they bolt directly through the outriger cross member's which then allow our quick install feeted GAS IT tank to be fixed to the vehicle. Our EASYFIT gas tank's allow 1 man installation and quick and easy removal should you need to in the future for jobs like repainting the van which would go into an oven.   All fixing's to bolt the tank mounting frame to the vehicle and the GAS IT tank to the mounting system are provided. We also sell installtion tools like drill bits, stone guard, gloves and safety glasses to name just 4 to aid you on our webshop )

On completion, your installation will not only comply with the relevant road vehicle gas regulations for the UK and Europe, but it will exceed their technical requirements and make your GAS IT tank safe and legal for use on the roads.

If you want a different GAS IT tank size from this 30 ltr EASYFIT gas tank, then we also offer the option of using a 20, 25, or even 38 ltr GAS IT EASYFIT gas tank.  

Options available to select on our website include various fill point options and colours, underbody tank spray, stainless pigtail lenghts and regulator options.

As all GAS IT tanks are fitted with automatic excess flow valves in the inlet and outlets of the tank, It complies with the EN1949 regulations which states you do not need to fit a crash sensing regulator to run your gas whilst moving ( assuming your gas appliance system its approved to be used whilst vehicle is in motion.)

In line with the N.C.C. CoP 306 and also the gas tank manufactures requirements, you must protect your GAS IT tank when mounting underneath the vehicle from mechanical damage caused by stones and road debris. A good quality rubberised underbody spray to help protect and prolong your gas tanks life, and the associated mounting system, from Stone chips and future rust must be applied on install.

We sell an underbody spray on our webshop for this application via the install tool and accessories category.  Please make sure the rubberised coating on the tank is checked at least once a year and recoated in any areas that have been washed away by general road wear.

Failure to protect the tank against stone chips and mechanical damage on install will invalidate any warranty on the tank and mounting system.

The GAS IT gas tank kit is a full 30 ltr gas tank kit with a undersill fillpoint system ( drivers side) which does not require the body to be drilled to fit a fillpoint mounting box  :- 
1x (GI-VT-021-F-S-C) 30Ltr GAS IT fully valved tank with black powder coated airbox & factory fixed mounted feet.
1x (GI-TF-067-KIT) Set of Heavy duty vehicle specific chassis mounting brackets.
1x (GI-0083) Chassis bracket fitting kit - M10 ISO bolts, washers, nuts.
1x (GI-FH-048) 1.5 mtr OEM R67 approved Light weight filler hose.  This fill hose requires simple self assembly and takes a few minutes with hand tools.
1x (GI-FP-009-S) Fill point mounting bracket
1x (GI-FP-002) Brass fill point with 90° outlet
1x (GI-FP-010) Fill point dust cover 
1x (GI-TOOL-017) Leak Test Spray 10ml 
1x (GI-STICK-008) LPG Saftey Sticker for LPG Tank
1x (GI-SPR-001) GAS IT Black Gas Tank & Underbody Coating Spray 500ml

Please note that this GAS IT tank does not come with a mechanical or remote LED displays and senders level indicator.  Please visit the ‘Gas level indicators and switches section’ of the GAS IT webshop to purchase your required gas level indicator of choice.

Before buying this system, we always recommend you make sure the location where the GAS IT EASYFIT gas tank is designed to fit is not already used by the vehicle manufactuers for AdBlue tanks, water or waste tanks, steps and so forth, and that the gap between each cross member as per the bracket measurments in this kit.
Product CodeGI-VT-021-KIT-VW
ManufacturerGAS IT

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.