• Click to enlarge
  • Click to enlarge

Product Information

Please make sure this tank 100% fits the location and vehicle you have before purchase as it is a special order items and as special order items are exempt from normal returns under UK government guidelines.

If your not sure it 100% fits we ask that please do not purchase this item & contact a GAS IT Dealer first.


If your new to our Remote Electric Shut off tanks here's a couple of things to remember  :

1) When buying this tank you will need some way of turning the remote operated electric valve on and off selectable directly from the drop down menu or via Visit our GAS IT Electronics & Controllers - Low Voltage category by clicking here to see the options available to you.

2) The outlet of our GAS IT Electric valve is completely different to our normal pigtails available as it is aW20 x 1/2UNF type. We have 3 lengths available in stainless steel designed to work directly with our electric outlet valve. The part numbers are : GI-PT-SS-027-ASSM, GI-PT-SS-028-ASSM and GI-PT-SS-029-ASSM ( CLICK HERE )


This electric operated gas outlet 600mm X 230mm 55LTR GAS IT Spare Wheel Shaped ( TOROIDAL) Vapour Tank is unique in that it has all the safety features built in to it via its 4 hole valve system and it has all the well known GAS IT safety features built in to it like the GAS IT Liquid Phase Separator, 80% shut off gas fill valve & Excess Flow Valve on the inlet and outlets, plus it comes with the super easy to mount options - like Factory Welded Feet and through tank fixture tubes. Our Remote Operated Electric outlet Options which when used with the separately purchased ULCD Switch kits listed on our webshop will allow you to turn the gas tanks on and off remotely at the tank outlet directly.

This tank must not be confused with the single hole multivalve automotive tanks that are being sold as vapour tanks - This GAS IT tank is the only one to be designed built and specified for vapour out use by the manufactures and has the inbuilt liquid phase gas separator.

Being a spare wheel shaped tank it is a universal fitment so if you have the space available and ground clearance of 200mm under this tank then it could be the gas tank you want to fit in place of your spare wheel - of where the tank will fit even.

This listing is the 55 ltr tank and pre-installed valves & airbox only. You will need to buy other parts which are all available on our webshop to complete the install e.g. fill point, brackets, hoses, electronics and so on.

This Tank come fully valved, with the latest Black powder coated protective aluminum air box and even comes with the bolts & washers for the top mount fixing brackets.

It is a 55ltr water capacity ( 44ltr LPG ) which means they hold 20% less than their listed amount due to automatic 80% float driven shut off filling valve in the tank when filled by gas, meaning you will never over fill the tank even when only part of the gas has been used - They will always fill up to 80%

They are fully UK & EU approved, for use on road going vehicles and for self filling.

Please note the 230 diameter size is the size of the tank only and does not include the extra size of the valve box as seen in the picture. 

In line with the N.C.C. CoP 306 and also the gas tank manufactures requirements, you must protect your GAS IT tank when mounting underneath the vehicle from mechanical damage caused by stones and road debris. A good quality rubberised underbody spray to help protect and prolong your gas tanks life, and the associated mounting system, from Stone chips and future rust must be applied on install.

We sell an underbody spray on our webshop for this application via the install tool and accessories category.  Please make sure the rubberised coating on the tank is checked at least once a year and recoated in any areas that have been washed away by general road wear.

Failure to protect the tank against stone chips and mechanical damage on install will invalidate any warranty on the tank and mounting system.

The tank picture above shows the Analogue / Mechanical gauge mounted into the brass GAS IT level valve, this is for illustration purposes only as no GAS IT tanks come supplied or fitted with any mechanical, remote LED displays or tank sender level indicator.  Please visit the ‘Gas level indicators and switches section’ of the GAS IT webshop to purchase your required gas level indicator parts of choice.  

Before buying this Tank system, we always recommend you make sure the location where the tank is designed to fit is not already used by the vehicle manufactures for water tanks, steps and so forth, and that the gap between each cross member as per the bracket measurements in this kit. Also check the distance available between the vehicle main chassis and exhaust to make sure this size tank will fit in the space required as custom assembled tanks cannot be returned.

This GAS IT Part is fully NCC Code of Practice 306 Compliant for Motorhome vapour tanks installs.

We always recommend you check to make sure you have space under you vehicle for this mounting system to fit, and that there is sufficient ground clearance.

Product CodeGI-VT-022-F-SOL
ManufacturerGAS IT

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.