SPECIAL OFFER! Truma Monocontrol CS 8mm c/w elbow

SPECIAL OFFER! Truma Monocontrol CS 8mm c/w elbow
  • Click to enlarge
£66.55 £30.00


Total SpendDiscountPrice Each

Product Information

Truma Monocontrol CS for 8mm c/w elbow - With crash control sensor

Truma Part number 52411-63 ( vertical model )

Connections - Pigtail on inlet and 8mm connection outlet to copper / steel pipe of vehicle 

Safety gas pressure control system for the operation of one-cylinder systems in caravans and motor caravans while driving due to its automatic shut off of the gas system in an accident.

The control system is approved throughout Europe and complies with the EN 13786 standard.

Outlet pressure 30 mbar

Gas pressure regulator with crash sensor for single cylinder operation ( we sell Auto Changeovers for more than one bottle or tank fitment )

Safety gas pressure control system for the operation of one-cylinder systems in caravans and motor caravans while driving.

The integrated crash sensor of the Monocontrol CS enables safe heating even while driving. It prevents gas from escaping after an accident because the gas valve of the cylinder was open.

 Vertical mounting possible

 Simple reset of the crash sensor


Picture: Installation situation schematic for reference only - shows parts not supplied with the regulator.


If the crash sensor is triggered, you can reset it yourself and the pressure regulator station is quickly ready for use again.

All you have to do on the Monocontrol CS is press the green reset button vigorously for about five seconds.
The controller capacity is 1.5 kg/h and is therefore designed for maximum consumption.

 Integrated test connection

Use permitted throughout Europe

On a new install and vehicle build please note the regulator is mounted higher than the gas bottle - the high-pressure pigtail hose to the cylinder valve. (see picture)

Advantages and features of the Monocontrol CS

 If the vehicle heating is approved for use wheilst driving there is a integrated mechanical crash sensor, which blocks the gas passage in the event of an accident with a delay of 3.5 g ± 0.5 g acting directly on the release element; this corresponds to an impact speed of approx. 15 to 20 km/h on a solid obstacle with an average vehicle weight Europe-wide use through the use of country-specific high-pressure hose lines (not included)

 Test device for leak testing of the liquid gas installation without dismantling the pressure regulating device


EC type-examination according to DGR and heating appliance directive

Scope of delivery

Low pressure regulator with safety relief valve PRV, mechanical crash sensor, control knob, gas return safety device, test device and wall bracket

Dimensions: 214 x 80 mm (H x W)

Optional remote display (including anti-ice) for convenient indication of the removal status in the vehicle interior available.

For full information on how this GAS IT part works and functions plus how to install it, please visit the GAS IT Online Knowledgebase and search for the part number or product description.


Any sales questions please do not hesitate to email or call our GAS IT Sales on sales@gasit.co.uk or Telephone 01286 832443

Product CodeGI-REG-054

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.