Ultra Low Current Driver ( ULCD 2.0 ) with Rocker switch, Led Display & 0-95 ohm sender

Ultra Low Current Driver ( ULCD 2.0 ) with Rocker switch, Led Display & 0-95 ohm sender
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge

(Quantity discounts available)

Product Information
Quantity Discounts

GAS IT ULCD 2.0 ( Ultra Low Current Device ) & 12 volt Rocker Switch, LED Contents Display with Switch and 0-95 ohm sender unit

The ULCD 2.0 is an Electronic Control Unit used to operate a GAS IT electric remote solenoid service valve as fitted in as an option in our GAS IT vapour tanks & GAS IT Plus bottles and the 9 LED display shows the gas contents in your GAS IT tank and the 12 Volt rocker Switch turns the gas on and off.

The ULCD 2.0 solves the problem of draining the vehicles battery when an electric outlet valve is fitted to a GAS IT tank or bottle because without our ULCD 2.0 the electric solenoid valve will draw a high current which over a short time could flatten the vehicles battery.  Our ULCD 2.0 works by reducing the Current / Voltage to hold the valve open and thus increases the time significantly before your battery will need to be recharged.


 Significantly reduces the current to the gas tanks electric outlet valve and thus increase vehicle battery life. ( From 1.2 amp opening operational sequence to approximatly 0.07 amp holding open sequence of the gas tank solenoid ) 

 Easy install - Just 5 wires to connect ( see wiring instructions on GAS IT Knowledgebase )

 Proven technology with many years worth of sales

 Buy with confidence - Free support by telephone or 24/7 help system


This Kit includes :

1 X ULCD 2.0 ( PT Number GI-ELE-063 )

1 x Blade Fuse Holder & 2 amp Blade Fuse ( PT Number GI-ELE-062 )

1 x 12V rocker Switch ( GI-ELE-013 )

1 x 0-95 ohm gas tank sender ( GI-ACCS-023 )

1 x 9 LED Gas level contrents display ( GI-ACCS-022 )


Please note the GAS IT ULCD will not work with any other make or brand of tank or bottle solonoid or shut off valve.


For full information on how this GAS IT part works and functions plus how to install it, please visit the GAS IT Online Knowledgebase and search for the part number or product description.


Any sales questions please do not hesitate to email or call our GAS IT Sales on sales@gasit.co.uk or Telephone 01286 832443

Product CodeGI-ELE-067
ManufacturerGAS IT

You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they'll cost.

QuantityPrice per unit

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.